Sensor Configuration and Numbering
SMART MATRIX TWIST
- 2-10 -
Sensor Configuration and Numbering
This function allows you to univocally identify each IS3.. device connected to SM-DIN TWIST Boards or
ACT/Power.
Enter the
SETUP
menu.
Select
IDENTIFY
.
•
Point and select
BOARDS NUMBER
:
•
Set the number of SM-DIN TWIST Boards used [1..8]
(
in the example
1
).
•
Set the number of the 1
st
Board (
FIRST BOARD
)
+
Always set
FIRST BOARD
=1.
•
Point the symbol of 1
st
Board.
•
Select the field indicating the number of sensors
connected to Board 1 (
default
0
).
•
Set the number of sensors actually connected to Board
1 (
e.g.
7
) and confirm.
•
Point the symbol of 2
nd
Board and so on for all the
Boards used.
Once you have configured all the Boards.
SAVE
to save the settings.
SETUP
→
IDENTIFY
FIRST BOARD
Summary of Contents for SMART MATRIX TWIST
