bto x-book 17cl46 User Manual Download

Page: 139 / 308

Modules

Overview 7 - 1

Chapter 7: Modules

Overview

This chapter contains the information on the various modules (some of which are

optional

) which may come with your computer, depending on the configuration

purchased. If you are unsure please contact your service representative.

The chapter includes information on the following:

• Setting Up SATA RAID or AHCI Mode
• PC Camera Module
• Wireless LAN Module
• Intel® Wireless Display Application
• Fingerprint Reader Module
• Bluetooth Module
• THX TruStudio Pro Audio
• Intel® Rapid Storage Technology Driver
• Intel® Rapid Start Technology Driver

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands