bto x-book 17cl46 User Manual Download

Page: 219 / 308

Modules

Intel® Rapid Storage Technology Driver 7 - 81

Intel

Rapid Storage Technology Driver

Install the

Intel® Rapid Storage Technology

to support your SATA drive if set up

AHCI mode

in the BIOS (see

“SATA Mode (Advanced Menu)” on page 5 - 9

)

or if you have set up your hard disks in a RAID configuration (see

“Setting Up SATA

RAID or AHCI Mode” on page 7 - 2

Insert the

Device Drivers & Uti User’s Manual

disc into the CD/

DVD drive.

2. Click

Option Drivers

(button).

3. Click

7.Install IRST Driver

> Yes

4. Click

Next > Next > Yes > Next > Next

5. Click

Finish

to restart the computer (you will need to restart the system

again after the computer has rebooted).

If you have an

Solid State Drive (SSD) module

included in your purchase option

you may configure

Intel® Smart Response Technology

for your system (

see

over

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands