bto x-book 17cl46 User Manual Download Page 111

Page: 111 / 308

BIOS Utilities

Advanced Menu 5 - 9

Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)

You can adjust the Bluetooth module power setting to your preference. The default
setting (

Disabled

) will see the Bluetooth module powered off when the system is

started up or restarted. Enabling the power setting will have the module retain the
last power status (on or off) before any restart or shut down.

Intel(R) Rapid Start Technology (Advanced Menu)

Enable/disable

Intel(R) Rapid Start Technology

from this menu. The rapid start

hibernation mode can resume power within 5 to 6 seconds and can remember your
computer's state with zero power.

SATA Mode (Advanced Menu)

You can configure SATA (Serial ATA) control to operate in

IDE

(native/compati-

ble),

AHCI

(Advanced Host Controller Interface) or

RAID

(Redundant Array of In-

dependent disks)

modes from this menu. The

SATA Mode

should be set

BEFORE

installing an operating system

, and after you have backed up all necessary files and

data (see sidebar). See

“Setting Up SATA RAID or AHCI Mode” on page 7 - 2

for

details. Make sure you install the

Intel Rapid Storage Technology application

you have set the SATA Mode to

RAID

AHCI

“IRST Driver Installation” on

page 7 - 9



SATA Mode

Selection

If you have installed the

Windows 7

operating

system with either

IDE

AHCI or RAID

mode en-

abled,

DO NOT

disable

the set mode

(if you wish

to disable the set mode
you will need to reinstall
the

Windows 7

OS).

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Brands by name

Popular brands