bto x-book 17cl46 User Manual Download

Page: 147 / 308

Modules

Intel Rapid Storage Technology 7 - 9

Intel Rapid Storage Technology

The

Intel Rapid Storage Technology application

provides high-performance

SATA and SATA RAID capabilities. Install the

Intel Rapid Storage Technology

application

(after installing all necessary drivers in the correct order) to support

your

RAID

system or SATA drive if set up in

AHCI mode

in the BIOS (see

“SATA

Mode (Advanced Menu)” on page 5 - 9

IRST Driver Installation

Insert the

Device Drivers & Uti User’s Manual

disc into the CD/

DVD drive.

2. Click

Option Drivers

(button).

3. Click

8.Install IRST Driver

> Yes

4. Click

Next > Next > Yes > Next > Next

5. Click

Finish

to restart the computer (you will need to restart the system

again after the computer has rebooted).

See the following pages for more information if you have set your hard disks up in
a RAID configuration.

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Related manuals for x-book 17cl46

Brands by name

Popular brands