bto x-book 17cl46 User Manual Download Page 224

Page: 224 / 308

Modules

7 - 86 Intel® Rapid Start Technology Driver

Intel

Rapid Start Technology Driver

Intel(R) Rapid Start Technology

can resume power from Hibernation within 5 to

6 seconds and can remember your computer's previous state with zero power.

System Requirements to support Intel® Rapid Start Technology:

• Rapid Start Technology should be enabled in the BIOS (see “

“Intel(R) Rapid

Start Technology (Advanced Menu)” on page 5 - 9

• Intel Rapid Storage Technology software installed.
• A Solid State Drive (SSD) with a minimum capacity of 18.6GB.

See overleaf for instructions on enabling

Intel® Rapid Start Technology

Summary of Contents for x-book 17cl46





















































































































































































































































































































Search results

Summary of Contents for x-book 17cl46

Reviews:

Brands by name

Popular brands

bto x-book 17cl46, User Manual

Search results

Summary of Contents for x-book 17cl46

Reviews:

Brands by name

Popular brands