BTG Visual-ICE User Manual Download Page 107

Page: 107 / 126

Visual-ICE™ Cryoablation System

7-25

Message

Reason for Appearance

60-09 Software Recovery

•

This will rollback the software on this system

•

Are you sure you want to do this?

YES NO

User pressed the

Software Recovery

button then selected Rollback. Activation

will rollback the software to the previous

software version.

60-10 Software Recovery

•

Are you sure you want to restore the default settings

for all configurations?

YES NO

User pressed the

Software Recovery

button then selected Load. Activation will

restore the system default settings for all

configurations.

REPORTS

70-01 Save Report

•

Do you want to save the report to the Visual-ICE

System?

YES NO

User selected End Procedure and was

provided an option to save the report

before exiting from procedure.

Summary of Contents for Visual-ICE































































































































Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands

BTG Visual-ICE, User Manual

Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands