BTG Visual-ICE User Manual Download Page 12

Page: 12 / 126

User Manual

only

Caution: Federal (USA) law

restricts this device to sale by

or on the order of a physician.

Footnotes

1. EN ISO 15223-1:2016 Medical devices –Symbols to be used with medical device labels,

labelling and information to be supplied – Part 1: General requirements

2. ASTM F 2503 – 13 Standard Practice for Marking Medical Devices and Other Items for

Safety in the Magnetic Resonance Environment

3.  USB Implementors Forum, Inc. standard icon.
4.  IEC TR 60878-3: 2015 Graphical symbols for electrical equipment in medical practice
5.  Symbols created by Galil Medical based on the symbols for Helium and Argon in the

Periodic Table of Elements.

6. EN 50419:2006 Marking of electrical and electronic equipment in accordance with article

11(2) of Directive 2002/96/EC (WEEE)

7. ETL Product Listing mark indicates the product is in compliance with North American

product safety standards. Compliance is determined through testing and certification by

Intertek Group plc.

8. USA Code of Federal Regulations 21 CFR Part 801 (§ 801.109(b)(1))

Summary of Contents for Visual-ICE































































































































Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands

BTG Visual-ICE, User Manual

Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands