BTG Visual-ICE User Manual Download Page 49

Page: 49 / 126

Visual-ICE™ Cryoablation System

4-3

The diagnostic tests check:

•

The correct version of firmware is running on the system

•

Critical system components including the solenoid valves, internal power supplies, cooling

fans, pressure transducers, and temperature measuring circuits.

If the system detects a failure of an individual channel, the channel is disabled and the needle

type display window, bordered in red, notes the channel is defective. A message indicating the

failure is displayed in the upper right-hand corner of the Navigation Tool Bar

Screen 4-1. Disabled Channel

A failure that prevents use of the system displays a message directing you to contact Galil

Medical Customer Service (reference Section 7.7).

If the Visual-ICE System software detects pressurized gas in the system and the gas supply is

not connected, a message appears requesting you to vent the gas from the system.

Screen 4-2. Vent Gas Message

Summary of Contents for Visual-ICE































































































































Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands

BTG Visual-ICE, User Manual

Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands