BTG Visual-ICE User Manual Download Page 32

Page: 32 / 126

3-2

User Manual

3.2 Startup Screen

After logging into the system, the

Startup Screen

displays several options.

Screen 3-2. Startup Screen

Table 3-1. Startup Screen Buttons

Button

Description

Start Procedure

Transition to the

Procedure Screen

to start a cryoablation

procedure.

Logout

Log out of the system.

View Reports

View the contents of a report and export reports to a Galil

Medical USB flash drive.

NOTE:

Administrative users may also delete reports.

Configure

Settings

Configure various system settings (reference Section 5.1).

NOTE:

Some configuration parameters are limited to

administrative and/or service users only.

User Manual

View information on how to access an electronic version of the

User Manual.

Remote Upload /

Download

Upload reports and download new software and configuration

files from a Galil Medical server.

Service

Field Service personnel login to modify configuration settings,

perform and record preventive maintenance activities.

NOTE:

This option is only available to authorized field service

personnel.

Summary of Contents for Visual-ICE































































































































Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands

BTG Visual-ICE, User Manual

Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands