BTG Visual-ICE User Manual Download Page 80

Page: 80 / 126

5-4

User Manual

5.1.1

Manual Software Update

Administrative and service users can manually update the Visual-ICE System software via a Galil

Medical USB flash drive.

Press the

Manual Software Update

button on the

Configure Settings Screen

(Screen 5-1).

Press the

Browse

button to select the update file and press

Update

. A confirmation message

appears when the software update is complete (Screen 5-2).

Screen 5-2. Software Update Confirmation

NOTE:

All users can update the software using the

Remote Upload / Download

button on the

Startup Screen

(reference Section 3.5)

5.1.2 Configure Ethernet

The Visual-ICE System must be configured to access one of two Galil Medical servers for remote

uploading of reports and downloading of software updates. This function is only available to

administrative and service users.

The Visual-ICE System may be configured to use a static IP address or work with a DHCP server to

obtain the address dynamically. Consult the network administrator about proper network access prior

to configuring the system.

Summary of Contents for Visual-ICE































































































































Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands

BTG Visual-ICE, User Manual

Search results

Summary of Contents for Visual-ICE

Reviews:

Related manuals for Visual-ICE

Brands by name

Popular brands