Pg. 34
If the rides still do not appear in the list of activities or if you get a "fail" notification, please contact
support
_
V. Memory Full:
*If after recording a ride you do not see the record in the activities or the device's internal memory (when plugged
into the PC), your device's memory may be full.
In order to free up device memory, please follow the step-by-step instructions below:
1. Connect your device to your PC using its original USB cable.
2. After the device is detected by your PC, open the Bryton "disk" (Bryton Folder)
3. Open the "System" folder (/Bryton/System/) and copy the "Profile.bin" file to your desktop or a folder on your
PC. (this file will be used again in step 8). After the file has been successfully copied, you can delete the file from
the System folder.
4. Go back to the main "Bryton" folder on your device (/Bryton/). In this folder you may see some files in .fit (FIT)
format - these are your rides. In another folder on your PC, copy and paste the .fit files (this will back up your rides
so as to not lose your ride data). After successfully copying the rides (.fit files) to your PC, you can delete them
from your device (/Bryton/).
5. Unplug your device from the PC
6. On your device, navigate to "Perform Factory Reset" and select "Yes" (please see the device Quick-Start Guide /
User manual to find the location of this option). Selecting "Perform Factory Reset" will delete all data on your
device, so be sure that you have backed up your files as outlined in the above steps.
7. Once the reset is complete, the device will reboot. After reboot, connect the device back to your PC using it's
original USB cable again.
8. Open the "System" folder (/Bryton/System/) and delete the "Profile.bin" file. Afterwards, find the "Profile.bin"
file that you saved to your PC in step 3 and copy that into the "System" folder (/Bryton/System/). This will restore
your profile data to your device.
9. Once the file is copied, remove your device from the PC and the memory should be cleared.
*If you have rides that have not been synced to Bryton Active, please visit https://active.brytonsport.com and click
the add button (+) (in the upper right hand corner). In your PC, locate the rides (.fit files) that you copied in Step 4
and drag-and-drop them into this web page OR select "Choose Files" and select them from the window prompt.
