Pg. 13
2. Open the “Files” app and locate the downloaded file.
3. Press the file and select “open with Active”
4. In the Bryton Active App, name the file and save. This route will now appear in “My Routes”
*Please note: After importing the route, the name can no longer be changed. When importing routes, results may
vary.
C. Upload Route to Device:
Before attempting to upload an imported Route to your device, please ensure that your device is compatible with
this feature.
1. In order to send this route to a compatible device, return to the “Course” tab and select “My Route”. The imported
route should appear in this list.
2. Select the desired route and then press the send to device icon in the top right of the app. (Please note that it
may take a few minutes to send the route to the device depending on size and complexity).
3. After sending the route to the device, it can be found in the device menu under “Follow Track”>”View”.
Please contact
support
_
if you have any questions.
XII. Add Map to OSM Enabled Device
A. Aero 60 / Rider 450
In order to manually add a map a Bryton OSM enabled device, please follow the instructions below:
1. Download the desired map file(s) from the official Bryton Website by going to
(
https://www.brytonsport.com/#/supportResult?tag=BrytonTool
) and click [Download] > [Map] > and then choose
the map you would like to download. Please do not rename the file(s) or change the file extension(s), as this may
cause errors to occur.
2. Using the Bryton device’s original USB cable, plug the device into the PC and in the “Bryton” disk, navigate to
[Bryton>MAP].
3. Copy the downloaded map(s) and paste in the [Bryton>MAP>Update] folder.
*If there is not enough free space on the device to add the map(s), please remove unnecessary map files.Map files
are stored in the following locations: [Bryton>MAP>Update] & [Bryton>Map>Preload]. After adding the map file(s),
please ensure that the device still retains at least 100MB of storage space in order to operate properly.
4. After the map file(s) has been successfully added to the device, go to the [Bryton>MAP>Data] folder and delete
all of the contents and folders (these will repopulate after first map loading).
