Pg. 11
4. Select the files you would like to sync and choose Upload
It may still take a few minutes for the rides to appear on Strava. If the rides still do not appear in the list of
activities or if you get a "fail" notification, please contact
support
_
*Please note: Enabling Strava Auto Sync will also enable Strava Route Auto Sync.
IX. Enable TrainingPeaks Auto Sync
In order to enable TrainingPeaks Auto Sync, please follow the instructions below:
1. Open the Bryton Active App and click on the "Profile" tab
2. Select "3rd Party Account Link"
3. Select "TrainingPeaks"
4. Enable "TrainingPeaks Auto Sync"
5. If you have not already enabled "TrainingPeaks Auto Sync", you will be prompted to log in. Follow the instructions
in the app and ensure that "TrainingPeaks Auto Sync" is enabled afterwards.
After enabling "TrainingPeaks Auto Sync", Bryton Active will only upload NEW activities to TrainingPeaks (ones that
are synced with Bryton Active only after this is enabled). If you would like to sync rides that are already saved on
your device or if after syncing device with Bryton Active the rides do not appear on TrainingPeaks within an hour,
please follow the instructions below:
1. Using the original USB cable, plug the Bryton device into your PC.
2. In the main Bryton directory/folder, locate the file(s) that were unable to sync (these files will be in .fit format).
To easily locate the ride, sort files by Date.
3. After finding the file(s), navigate to the TrainingPeaks website in your web browser
4. Select the files you would like to sync and choose Upload
It may still take a few minutes for the activities to appear on TrainingPeaks. If the activities still do not appear in
the list of activities or if you get a "fail" notification, please contact
support
_
X. Enable Selfloops Auto Sync
In order to enable Selfloops Auto Sync, please follow the instructions below:
1. Open the Bryton Active App and click on the "Profile" tab
2. Select "3rd Party Account Link"
3. Select "Selfloops"
4. Toggle "Selfloops Auto Sync"
5. If you have not already enabled "Selfloops Auto Sync", you will be prompted to log in. Follow the instructions in
the app and ensure that "Selfloops Auto Sync" is enabled afterwards.
