Pg. 47
To replace the battery, gently twist the back cover of the sensor to the unlock position and remove the cap (being
careful not to bend any of the metal components inside of it). Remove and safely discard the spent battery. Take
the new battery and place the positive side of the battery to face the end cap with the negative end facing toward
the sensor. Gently replace the end cap and turn toward the locked position. Once locked in place, move/use the
sensor until a green blinking light appears.
Contact Bryton Support If:
- Electrodes have become corroded or discolored
- Heart Rate band is broken or unable to be tightened
- If after changing battery, Heart Rate Monitor still unable to power on
III. Bryton Mount
Bryton “Rider” series computers are compatible with Bryton “Rider” mounts or inserts.
Bryton “Aero” series computers are compatible with Bryton “Aero” mounts or inserts.
If you are not sure which Bryton mount is right for your device/bicycle, please contact
support
_
*Please note that although similar in design, the “Garmin” mount is not fully compatible with Bryton GPS bike
computers and may cause damage to the device or come loose during rides.
Mount Damage:
If damage should occur to a Bryton mount or the mounting bars of the device, please contact your nearest Bryton
Dealer right away for repair in order to prevent further damage. It is also possible to contact Bryton Support at
support
_
IV. Button Troubleshooting
Buttons Stuck
If one or more buttons have become “stuck” in the device and are no longer able to be pressed, please contact
your nearest Bryton Dealer right away for repair in order to prevent further damage. It is also possible to contact
Bryton Support at
support
_
. Please be sure to provide photos as well as your full 16-digit UUID
and a copy of your receipt/digital invoice.
Buttons Broken/Missing
If a button has become damaged or has been removed from the device, please contact your nearest Bryton Dealer
right away for repair in order to prevent further damage. It is also possible to contact Bryton Support at
support
_
. Please be sure to provide photos as well as your full 16-digit UUID and a copy of your
receipt/digital invoice.
