Pg. 25
To rename a sensor, from the “Sensors” menu, the paired sensors in the sensor pool will be listed under “Manage
Sensors”. Press the desired sensor to open its menu. From here, the sensor can be renamed by pressing the edit
icon next to its Display Name. Once modification is complete, press the back button in the upper left corner to save
and exit.
IV. Settings Menus
A. CAD / Power with 0
This setting will enable/disable zero averaging for Cadence and Power recordings in an activity. When disabled,
zero values will not be included in overall average Cadence / Power, with the new average for the activity generally
being higher since it will only calculate Cadence / Power when the crank is turning.
For example: During a minute-long ride, there is a 20 second period of coasting where the pedal is not moving. The
remaining 40 seconds were pedaled at 90 rpm.
With “CAD with 0” disabled, the average would be: 90 rpm
With “CAD with 0” enabled, the average would be: 60 rpm
B. Modify Daylight Savings Time
To modify the Daylight Savings Time settings on the Rider 750, from the Home screen, press the Settings icon in
the bottom left corner of the screen. Then go to:
SYSTEM > SYSTEM SETTINGS > TIME/UNIT > DLIGHT SAVING > [select hours]
C. Change Time Format
To change the time format on the Rider 750, from the Home screen, press the Settings icon in the bottom left
corner of the screen. Then go to:
Settings Icon SYSTEM > SYSTEM SETTINGS > TIME/UNIT > TIME FORMAT > [choose time format]
