BRP SEA-DOO GTI 130 2019, Operator'S Manual

Page: 44 / 204

PRE-RIDE INSPECTION
ITEM OPERATION
✓
iTC lever
Check operation. (Depress and release
the lever to check for freedom of
movement. If any friction is felt, the lever
must be taken apart, cleaned, inspected
for wear and lubricated)
iBR lever (if equipped)
Check operation. (Depress and release
the lever to check for freedom of
movement. If any friction is felt, the lever
must be taken apart, cleaned, inspected
for wear and lubricated)
Front storage compartment cover,
glove box and seat
Ensure they are closed and latched.
Self-contained removable storage bin
Ensure it is installed on watercraft and
properly closed and latched.
Wakeboard rack (WAKE model)
– Ensure rack is properly installed and
secured.
– Make sure bungee cords are in good
condition.
– Ensure wakeboard is correctly installed
in rack and secured.
Ski/wakeboard post (WAKE model) Inspect and check operation.
Engine START/STOP button Check operation.
Engine cut-off switch and the
monitoring beeper
Check operation.
Battery condition and connections Check every month
Sacrificial anode
Inspect every month (more often in
saltwater use) and change if necessary
Hull
Inspect hull for cracks and other dam-
ages.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow of
water and damage the propulsion unit.
Clean as necessary. If any obstruction
cannot be removed, refer to an autho-
rized Sea-Doo dealer for servicing.
42
_______
SAFETY INFORMATION
________
https://www.boat-manuals.com/