BRP SEA-DOO GTI 130 2019, Operator'S Manual

Page: 56 / 204

CONTROLS
WARNING
If the throttle lever is still pulled in
when releasing the iBR lever, for-
ward movement will be initiated
after a short delay. If forward ac-
celeration is not desired, release
the throttle lever.
NOTE: The neutral position can be fine
tuned by trimming the iBR system.
Refer to OPERATING INSTRUCTIONS
for detailed instructions.
6) MODE/SET Buttons (All
Models Except GTR-X)
These buttons are located on the RH
side of the handlebar.
Press MODE button to scroll through
various functions available through the
information center.
Press SET button to select the desired
function, navigate through a function
submenu, or to save any modified set-
ting.
All Models Except GTR-X Model
sdd2009-001-024_b
TYPICAL
1. MODE
2. SET
3. UP/DOWN button
Refer to OPERATING INSTRUCTIONS
for detailed instructions.
7) UP/DOWN Buttons (All
Models Except GTR-X)
These buttons located on the RH side
of the handlebar.
All Models Except GTR-X Model
219001838-003_a
TYPICAL
1. Up button
2. Down button
The UP/DOWN buttons are used to
make a selection or change a setting
through the information center such
as:
– Gauge functions
– Ski mode
– Cruise mode
– Slow speed mode
– iBR neutral adjustment.
8) Cruise Button (WAKE
Models)
The Cruise button is located on the RH
side of the handlebar, just below the
UP/DOWN buttons.
sdd2009-001-024_g
TYPICAL
1. Cruise button
It is used to activate or deactivate
CRUISE mode or to engage SLOW
SPEED MODE.
54
______________
https://www.boat-manuals.com/