BRP SEA-DOO GTI 130 2019, Operator'S Manual

Page: 22 / 204

ACTIVE TECHNOLOGIES (iCONTROL)
unlike an automotive type cruise con-
trol which maintains a constant speed
while throttle pedal is released.
As you proceed under a constant cruis-
ing speed setting, hold the throttle
lever fully depressed in order to keep
your full attention to maintaining good
situational awareness.
Refer to
OPERATING MODES
for de-
tailed instructions.
Speed Limiter Mode (if equipped)
Speed Limiter mode allows the opera-
tor to set a desired maximum speed of
the watercraft when operating above
3800 RPM.
Speed Limiter mode limits watercraft
speed but does not maintain it. The
operator must hold the throttle lever
depressed to maintain forward speed,
unlike an automotive type cruise con-
trol which maintains a constant speed
while throttle pedal is released.
As you proceed under a constant cruis-
ing speed setting, hold the throttle
lever fully depressed in order to keep
your full attention to maintaining good
situational awareness.
Refer to
SPEED LIMITER MODE
in
OP-
ERATING MODES
for detailed instruc-
tions.
Slow Speed Mode (if equipped)
Slow speed mode is a function of
cruise mode or speed limiter mode
which allows the operator to adjust and
set idle speed corresponding to a wa-
tercraft speed of 1.6 km/h to 11 km/h
(1 MPH to 7 MPH). The throttle lever
should not be depressed while operat-
ing in slow speed mode.
Refer to
OPERATING MODES
for de-
tailed instructions.
Ski Mode (if equipped)
Ski mode allows for a controlled launch
and accurately maintained maximum
towing speed when towing a skier or
wake boarder.
Refer to
OPERATING MODES
for de-
tailed instructions.
O.T.A.S. TM System (If Equipped)
(Off-Throttle Assisted Steering)
The O.T.A.S. (Off-Throttle Assisted
Steering) system provides additional
maneuverability in off-throttle situa-
tions.
The O.T.A.S. system is electronically
activated when the operator initiates a
full turn and releases the throttle at the
same time.
Limitations
The O.T.A.S. system cannot help you
maintain control or prevent collisions
in all situations.
Refer to
OPERATING INSTRUCTIONS
subsection for details.
Learning Key Mode
The Sea-Doo TM learning key limits the
speed of the watercraft therefore en-
abling first time users and less expe-
rienced operators to learn how to op-
erate the watercraft while gaining the
necessary confidence and control.
Limitations
The ability of a novice to operate the
watercraft can be exceeded even
when a learning key is used.
Refer to
OPERATING MODES
for de-
tails.
iBR (intelligent Brake
and Reverse System) (if
equipped)
This watercraft uses an electronically
controlled braking and reverse system
called the iBR system (intelligent Brake
and Reverse).
The iBR module controls the position
of the iBR gate to provide:
– Forward
– Reverse
20
_______
SAFETY INFORMATION
________
https://www.boat-manuals.com/