Creek Company ODC SUPERSPORT XR 1 Assembly Instructions Download Page 1

Page: 1 / 4

ODC SUPERSPORT XR 1

ASSEMBLY INSTRUCTIONS

THIS BOX CONTAINS:

STEEL FRAME

(1) Left Frame Member

(1) Right Frame Member

(1) Seat Support Frame Member with Underseat Lift and Lock Anchor System Attached

(1) Plastic Seat Back

(1) Plastic Seat Bottom

(4) Seat Screws

(2) Seat Assmbly Pins

(2) Foot Bars

(1) Cargo Deck with Motor Mount and Battery plate

(1) Stripping Apron

(8) Snap Pins

(1) Rod Holder

OARS & OARLOCKS

(1) Pair 6-foot 2 piece Oars

(1) Pair Clamp-on Oarlocks

PONTOONS

(1) Left Pontoon

(1) Right Pontoon

(8) Cam Lock Straps

Each Pontoon consists of Nylon Cover with PVC bottom featuring integral Side Storage Pockets,

and Main Bladder with Valve Insert and Valve Plate all preassembled.

PUMP

Complete with a set of Adaptors

OUTDOOR DISCOVERY CRAFT

Summary of Contents for ODC SUPERSPORT XR 1

Page 1: ...smbly Pins 2 Foot Bars 1 Cargo Deck with Motor Mount and Battery plate 1 Stripping Apron 8 Snap Pins 1 Rod Holder OARS OARLOCKS 1 Pair 6 foot 2 piece Oars 1 Pair Clamp on Oarlocks PONTOONS 1 Left Pont...

Page 2: ...al 1 Inflate each Pontoon The Valve is located inside the Storage Pocket of each Pontoon see figure 3 Inflate until firm do not over inflate 2 Again be sure top Valve Cap and Valve Assembly are fully...

Page 3: ...pport Member Fig 3 Pontoon to Frame attachment Frame slips over two Storage Pockets Rod Holder Fig 2 Detail of Snap Pin installation All Frame parts attach with Snap Pins Your Frame assembles using 8...

Page 4: ...d repeat pontoon inflation instructions 2 Do not store your ODC SUPERSPORT XR 1 TM in direct sunlight 3 If you are leaving your ODC SUPERSPORT XR 1TM out in the sun for any amount of time be aware tha...