BRP SEA-DOO GTI 130 2019, Operator'S Manual

Page: 159 / 204

TROUBLESHOOTING GUIDELINES
ENGINE TURNS NORMALLY BUT WILL NOT START (cont’d)
2. Fouled/defective spark plugs.
– Replace.
3. Blown fuse.
– Check wiring then replace fuse(s).
4. Water-flooded engine.
– Refer to WATER-FLOODED ENGINE in SPECIAL PROCEDURES.
5. Engine management system fault detected (check engine pilot lamp is
ON).
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
6. Faulty fuel pump.
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
ENGINE MISFIRES, RUNS IRREGULARLY
1. Fouled/defective/worn spark plugs.
– Replace.
2. Fuel: Level too low, stale or water-contaminated.
– Siphon and/or refill.
3. Faulty ignition coil(s).
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
4. Clogged injectors.
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
5. Engine management system fault detected (check engine pilot lamp is
ON).
– Refer to MONITORING SYSTEM.
ENGINE SMOKE
1. Oil level too high.
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
______________
157
https://www.boat-manuals.com/