BRP SEA-DOO GTI 130 2019 Operator'S Manual Download

Page: 129 / 204

MAINTENANCE PROCEDURES

5. Wait at least 30 seconds for the oil

to settle in the engine, then pull dip-
stick out and wipe clean.

219001695-301_a

TYPICAL

1. Oil dipstick location

6. Reinstall dipstick, push in com-

pletely.

7. Remove dipstick again and read

oil level. It should be between the
FULL and ADD marks.

lmr2007-053-100_a

1. Full
2. Add
3. Operating range

8. Add oil to ensure the level is be-

tween marks as required.

To add oil:

– Unscrew oil cap.
– Place a funnel in the oil filler neck

opening.

– Add the recommended oil to the

proper level.

NOTE:

Do not overfill.

219001695-303_a

TYPICAL

1. Oil filler cap location

NOTE:

Every time oil is added in the

engine, the complete procedure ex-
plained in this section must be carried
out again. Otherwise, you will obtain a
false oil level reading.

9. Properly reinstall oil cap and dip-

stick.

Engine Oil Change and Oil Filter
Replacement

The oil change and filter replacement
may be performed by an authorized
Sea-Doo dealer, repair shop, or person
of your own choosing.

______________

127

https://www.boat-manuals.com/

Summary of Contents for SEA-DOO GTI 130 2019













































































































































































































Search results

Summary of Contents for SEA-DOO GTI 130 2019

Reviews:

Related manuals for SEA-DOO GTI 130 2019

Brands by name

Popular brands

BRP SEA-DOO GTI 130 2019, Operator'S Manual

Search results

Summary of Contents for SEA-DOO GTI 130 2019

Reviews:

Related manuals for SEA-DOO GTI 130 2019

Brands by name

Popular brands