BRP SEA-DOO GTI 130 2019 Operator'S Manual Download Page 105

Page: 105 / 204

OPERATING MODES

smo2011-003-100_a

NOTE:

After a few seconds, the gauge

will revert to its normal display.

3. Ensure the SPORT mode indicator is

turned on.

smo2011-003-100_d

SPORT MODE INDICATOR

NOTE:

The SPORT mode indicator will

come on and stay on as long as sport
mode is active.

Deactivating Sport Mode

To deactivate sport mode while riding
at speed, carry out the following:

WARNING

When deactivating sport mode, be
sure to maintain situational aware-
ness of other watercraft, obstacles,
or persons in the water.

1. Depress and hold the SPORT button

for at least 3 seconds.

NOTE:

The following message will

scroll in the multifunction display:
SPORT MODE DEACTIVATED.

smo2011-003-100_a

NOTE:

After a few seconds, the gauge

will revert to its normal display.

2. Ensure the TOURING mode indica-

tor is on.

ECO Mode
(Fuel Economy Mode)

Activating ECO Mode (GTR-X
Models)

Press mode button to change the oper-
ating mode until the ECO mode is dis-
played.

219001878-014_b

1. Mode button

219001973-002_c

ECO MODE INDICATOR

______________

103

https://www.boat-manuals.com/

Summary of Contents for SEA-DOO GTI 130 2019













































































































































































































Search results

Summary of Contents for SEA-DOO GTI 130 2019

Reviews:

Brands by name

Popular brands

BRP SEA-DOO GTI 130 2019, Operator'S Manual

Search results

Summary of Contents for SEA-DOO GTI 130 2019

Reviews:

Brands by name

Popular brands