BRP SEA-DOO GTI 130 2019, Operator'S Manual

Page: 115 / 204

OPERATING MODES
All Models Except GTR-X
To change learning key settings, carry
out the following:
1. Press the START/STOP button to
wake up the electrical system and
install the NORMAL key on the en-
gine cut-off switch.
2. Wait for the information center to
complete its self-test and display
the key recognition message.
3. Press the MODE button repeatedly
until KEY MODE is visible in the digi-
tal screen of the information center.
sdd2009-001-024_b
TYPICAL - GAUGE CONTROL BUTTONS
1. MODE button
2. SET button
3. UP/DOWN button
4. Press the SET button once to enable
learning key mode setting function.
The display will change to L-Key.
1
2
smo2011-003-100_q
1. L-KEY message
2. Learning key setting
5. Press the UP/DOWN button to tog-
gle the key setting between 1 and
5. See table for speed limitations
according to setting.
6. Press the SET button once to save
the setting, twice to exit the func-
tion, or simply wait for the function
to time-out. The change in key set-
ting will automatically be saved.
NOTE: The key speed setting is appli-
cable to any key of the same type used
on a specific watercraft. The same
key type used on a different watercraft
may therefore have a different key
speed setting.
GTI 900 ACE
D.E.S.S.
KEY
TYPE
KEY
SPEED
SETTING
APPROX.
MAX. SPEED
5
65 km/h
(40 MPH)
4
63 km/h
(39 MPH)
3
60 km/h
(37 MPH)
2
55 km/h
(34 MPH)
Learning
key
1
52 km/h
(32 MPH)
______________
113
https://www.boat-manuals.com/