Brother TD-4550DNWB, User Manual

Page: 137 / 195

• IPv6 Address List
Displays the list of IPv6 addresses.
Wired 802.1x Authentication
Configures IEEE 802.1x authentication.
•
Wired 802.1x Status
Enable or disable IEEE 802.1x authentication for wired network.
• Authentication Method
Select the authentication method.
• User ID / Password
You can specify settings only when EAP-MD5, EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS is selected as
the authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a
client certificate must be registered. To register a certificate, connect to the printer from a web browser,
and then specify the certificate. Installation of the authentication certificate can also be performed with the
Printer Setting Tool by going to the menu bar:
File > Install Certificates .
Wireless Settings
• Communication Mode
Displays communication mode.
• SSID(Network Name)
Clicking Search displays the available SSIDs in a separate dialog box.
• Channel
Displays the automatically selected channel.
• Authentication Method / Encryption Mode
The supported encryption modes for the authentication methods are shown in the table below.
Authentication Method Encryption Mode
Open System None / WEP
Shared Key WEP
WPA/WPA2-PSK TKIP+AES / AES
EAP-FAST/NONE TKIP+AES / AES
EAP-FAST/MS-CHAPv2 TKIP+AES / AES
EAP-FAST/GTC TKIP+AES / AES
PEAP/MS-CHAPv2 TKIP+AES / AES
PEAP/GTC TKIP+AES / AES
EAP-TTLS/CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAPv2 TKIP+AES / AES
EAP-TTLS/PAP TKIP+AES / AES
EAP-TLS TKIP+AES / AES
To specify higher level security settings: When performing certificate verification with EAP-FAST, PEAP,
EAP-TTLS, or EAP-TLS authentication methods, the certificate cannot be specified from the Printer Setting
Tool. After the printer is configured to connect to the network, specify the certificate by accessing the printer
from a web browser. Installation of the authentication certificate can also be performed with the Printer
Setting Tool by going to the menu bar:
File > Install Certificates .
• WEP Key
You can specify a setting only when WEP is selected as the encryption mode.
• Passphrase
133