IV - 3
Communication error between PC
and P-touch.
Check that the P-touch is connected to your
computer with the USB interface cable (that
comes with the P-touch). Also check the cable
for weak connection.
Make sure that the P-touch is turned on. If any
communications error has occurred, turn the P-
touch off and then on.
Not enough memory to print
document.
Wait until any other application(s) is finished and
then try to print again.
Not enough disk space to spool
document.
Ensure sufficient disk space.
Sending...
Print data is being sent. Please wait.
Printing...
Printing. Please wait.
Remove the tape from the output
slot. (PT-D600 only)
After removing the tape,
click [Resume] in Print Monitor.
Error of unknown cause occurred. Turn the printer off, then on again.
If the error cannot be resolved, repairs will be
necessary.
Cover open.
Close the cover.
Cannot print because printer is too
hot. Wait until printer cools down,
and then restart printing.
Wait until printer cools down, and then restart
printing.
The tape cassette type is different. After installing the appropriate tape cassette
(heat shrink tube), click [Resume] in Print
Monitor.
The tape cassette type is different. After installing the appropriate tape cassette
(TZe or HGe tape), click [Resume] in Print
Monitor.
If this message appears on the
computer screen:
Do this:
Summary of Contents for P-touch PT-D600
Page 1: ...SERVICE MANUAL MODEL PT D600 ...
Page 171: ...Oct 2014 SM PT079 1 ...
