Brother P-touch PT-D600 Service Manual Download Page 14 | Manualshive

Page: 14 / 171

background image

II - 3

2.1.2 Roller Holder ASSY Setting & Retracting Mechanism

This mechanism consists of the roller holder release lever, roller holder release rod
24B, roller holder ASSY and side sensor PCB ASSY.
The roller holder supports the platen and tape feed sub roller so that they can move
perpendicularly to the thermal head ASSY and tape feed roller built in the tape
cassette, respectively, as well as rotating freely.
Loading a tape cassette and closing the cassette cover pushes down the roller holder
release lever which moves the roller holder release rod 24B to the left as illustrated
below. This pivots the roller holder ASSY around the shaft provided on the side
sensor frame 24B so as to press the roller holder ASSY against the thermal head
ASSY side.
The platen is pressed perpendicularly against the thermal head ASSY with the tape
and ink ribbon (only the tape when using non-laminated thermal film tape cassettes)
sandwiched in between under a uniform load by the roller holder springs. At the same
time, the platen gear becomes engaged with the P idle gear and the side sensor
touch to the top of cassette to detect the width of the tape cassette.
Also, the tape feed sub roller is pressed perpendicularly against the tape feed roller
built in the tape cassette with the tape (and base paper when using laminated tape
cassettes) sandwiched in between under a uniform load by the roller holder springs.
At the same time, the sub roller gear becomes engaged with the tape drive gear
TZA24.
If you open the cassette cover, the roller holder release lever pops up so that the roller
holder release rod 24B retracts the roller holder ASSY from the thermal head ASSY
and side sensor also retracts from the tape cassette, providing you with enough
space to replace the tape cassette.

Figure 2.1-2 Roller Holder ASSY Setting & Retracting Mechanism

Tape cassette

Adhesive base tape

Laminate tape

Ink ribbon

Thermal head ASSY

Roller holder release lever

P idle gear

Tape feed roller built

in a tape cassette

(Tape idle gear)

Tape feed sub roller

Platen roller

Roller holder ASSY

Roller holder release rod 24B

Roller holder spring, lower

Roller holder spring, upper

Platen roller

Tape feed sub roller

Sub roller gear

Platen gear

Side sensor PCB ASSY

«
...
12
13
14
15
16
...
»

Summary of Contents for P-touch PT-D600












































































































































































Reviews:

No comments

Related manuals for P-touch PT-D600

Brand: Gaggia Pages: 7

Brand: Quick MILL Pages: 18

Brand: La Marzocco Pages: 53

Brand: Gaggia Pages: 61

Master Pasta 90.730

Brand: Beper Pages: 56

Avalon Galleria

Brand: Cafection Pages: 53

Brand: Binatone Pages: 50

Brand: Summit Pages: 28

Brand: Paderno Pages: 16

PicoBaristo HD8927/06

Brand: Saeco Pages: 84

Brand: Oster Pages: 24

Brand: Cooks Pages: 71

Brand: Jura Pages: 52

Brand: SEVERIN Pages: 1

Brand: SEVERIN Pages: 1

KAFFEEAUTOMAT KA 4156 -

Brand: SEVERIN Pages: 60

ESPRESSO-AUTOMAT

Brand: SEVERIN Pages: 1

160 BREAD-MAKER

Brand: SEVERIN Pages: 188

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands