Brother P-touch PT-D600 Service Manual Download Page 153

Page: 153 / 171

IV - 80

Any faintly

printed character?

If there is any foreign material on the thermal print head,
clean it up.

Check that the platen roller is set into place and works
normally.

If the printed characters become faint in cycles, the tape
feed sub roller gear in the roller holder ASSY may be
deformed. Replace the roller holder ASSY.

Check that the two positioning bosses provided on the
frame ASSY are centered in the oblong hole and the notch
part in the thermal head ASSY.

Enter the inspection mode (see Section 3.2)
and do the following:

Replace the main PCB ASSY.

- Select “Head Rank” in the Factory
Inspection mode.
- Regulate the motor speed in PRINT1
submode.

Platen center

Head surface

Platen roller

Positioning bosses

Thermal
head
ASSY

Oblong holes

Summary of Contents for P-touch PT-D600












































































































































































Search results

Summary of Contents for P-touch PT-D600

Reviews:

Related manuals for P-touch PT-D600

Brands by name

Popular brands

Brother P-touch PT-D600, Service Manual

Search results

Summary of Contents for P-touch PT-D600

Reviews:

Related manuals for P-touch PT-D600

Brands by name

Popular brands