Brother P-touch PT-D600 Service Manual Download Page 32

Page: 32 / 171

III - 6

CAUTION:

When handling the PCBs, put on a grounding wrist band. Failure to do so
might break LSIs and other electronic devices.

(3) Turn the machine left side up and gently open the bottom cover.

NOTE:

Do not pull the bottom cover away from the middle cover. Those covers are
connected with harnesses.

(4) Unsolder the b) terminal harness and the battery(-) terminal harness from the

main PCB ASSY.

(5) Remove the battery box film from the bottom cover.

Figure 3.1-4

Battery box film

B) terminal harness (RD)

Bottom cover

Main PCB ASSY

Middle cover

Battery(-) terminal harness (BK)

B) terminal harness (RD)

Battery(-) terminal harness (BK)

Summary of Contents for P-touch PT-D600












































































































































































Search results

Summary of Contents for P-touch PT-D600

Reviews:

Related manuals for P-touch PT-D600

Brands by name

Popular brands

Brother P-touch PT-D600, Service Manual

Search results

Summary of Contents for P-touch PT-D600

Reviews:

Related manuals for P-touch PT-D600

Brands by name

Popular brands