Brother P-touch PT-D600, Service Manual

Page: 48 / 171

III - 22
3.4 Write Setting Mode ([1] key):
Required on the Production Line
Be sure to provide power supply of DC12.0V ±0.1V / DC9.0V ±0.1V [Insert resistant
1
Ω ±5% (2W and more)] for the inspection from DC power or AA battery.
3.4.1 Head Rank Set Mode
Press the [OK] or [ENTER] key at the state of < Figure 3.2-1 >, or press the [1] key,
and the LCD displays as shown in < Figure 3.4-1 >.
Figure 3.4-1 Write Head Rank Mode
Press the [OK] or [ENTER] key to proceed to the display shown in < Figure 3.4-2 >.
The current head rank will be displayed on the right bottom of the LCD.
The indication of the head rank will be changed simultaneously by pressing the
[1] to
[3] , [ ] or [ ] key while this screen is displayed.
* The head rank is set to "B" by default.
Figure 3.4-2
After setting the head rank to "A", "B" or "C", proceed to "Write Country Set" by
pressing the
[OK] or [ENTER] key.
Current head rank shown on the right bottom of the LCD.
Head rank setting LCD
A A
B B
C C
HEAD RANK SET
1 : A 2 : B 3 : C
[ B ]