Brother MFC-L5500DN, Online User'S Manual

Page: 517 / 710

Home > Troubleshooting > Error and Maintenance Messages
Error and Maintenance Messages
(DCP-L6600DW/MFC-L6800DW/MFC-L6900DW)
If the LCD displays errors and your Android
™
device supports the NFC feature, touch your device to the
NFC logo on your Brother machine to access the Brother Solutions Center and browse the latest FAQs
from your device. (Your mobile telephone provider's message and data rates may apply.)
Make sure the NFC settings of both your Brother machine and your Android
™
device are set to On.
As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this
happens, your machine identifies the error or required routine maintenance and shows the appropriate message.
The most common error and maintenance messages are shown in the table.
Follow the instructions in the
Action column to solve the error and remove the message.
You can correct most errors and perform routine maintenance by yourself. If you need more tips: Visit
support.brother.com , and click FAQs & Troubleshooting .
Error Message Cause Action
2-sided Disabled The back cover of the machine
is not closed completely. Close the back cover of the machine until it locks
in the closed position.
The 2-sided tray is not installed
completely. Install the 2-sided tray firmly in the machine.
Access Denied The function you want to use is
restricted by Secure Function
Lock 3.0. Call your administrator to check your Secure
Function Lock Settings.
BT Call Sign On
(For U.K.)
The BT Call Sign setting is on.
You cannot change the Receive
Mode from Manual to another
mode. Set the BT Call Sign setting to off.
Cartridge Error
The toner cartridge is not
installed correctly. Remove the toner cartridge and drum unit
assembly. Take out the toner cartridge, and put it
back in the drum unit again. Reinstall the toner
cartridge and drum unit assembly in the machine.
If the problem continues, contact Brother
customer service or your local Brother dealer.
Comm.Error Poor telephone line quality
caused a communication error. Send the fax again or connect the machine to
another telephone line. If the problem continues,
contact the telephone company and ask them to
check your telephone line.
Cooling Down The temperature of the inside of
the machine is too hot. The
machine will pause its current
print job and go into cooling
down mode. Make sure you can hear the fan in the machine
spinning and that the exhaust outlet is not
blocked.
If the fan is spinning, remove any obstacles that
surround the exhaust outlet, and then leave the
machine turned on but do not use it for several
minutes.
If the fan is not spinning, disconnect the machine
from the power for several minutes, then
reconnect it.
Cover is Open The front cover is not
completely closed. Open and then firmly close the front cover of the
machine.
Cover is Open. The fuser cover is not
completely closed or paper was
jammed in the back of the
machine when you turned on
the power. Close the fuser cover located inside the back
cover of the machine.
Make sure paper is not jammed inside the back of
the machine, and then close the fuser cover.
510