manualshive.com logo in svg

Brother MFC-J3540DW, Online User'S Manual

Share
Download
Brother MFC-J3540DW Online User'S Manual Download Page 437

If your LCD displays repeat paper jam messages, for example 

[Repeat Jam Front/Rear]

, move the

print head, and then remove any paper remaining in this area. Make sure pieces of paper are not left in the
corners of the machine (1) and (2).

1 

2

When finished, continue with the next step.

IMPORTANT

•

If the print head is in the right corner as shown in the illustration, you cannot move the print head.
Close the scanner cover, and then reconnect the power cord. Open the scanner cover again, and
then hold down 

 until the print head moves to the centre. Then unplug the machine from the

power source and remove the paper.

•

If the paper is jammed under the print head, unplug the machine from the power source, and then
move the print head and remove the paper.

•

If ink gets on your skin or clothing, immediately wash it off with soap or detergent.

7. Gently close the scanner cover using the finger holds on each side.

8. If your LCD displays 

[Jam Front/Rear]

 or 

[Repeat Jam Front/Rear]

, do the following:

a. Open the Jam Clear Cover (1) at the back of the machine.

430

Summary of Contents for MFC-J3540DW
































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands