Brother MFC-8510DN, Service Manual

Page: 69 / 373

2-24
Confidential
3.2 Error Messages
The error messages displayed on the LCD of the machine and their description are shown in
the table below.
Error Message Description
Error
codes
Refer
to:
Access Error
The device was removed during data
processing.
---
Cartridge Error
The new toner sensor could not detect the new
toner cartridge correctly.
C000 2-60
Cooling Down
The internal temperature thermistor detected a
temperature higher than the specified value.
7500 2-41
Cover is Open
The eject sensor detected that the fuser cover
was open.
5600 2-37
When the power switch was turned ON, the
eject sensor detected paper pass or detected
that the fuser cover was open.
8D00 2-47
The front cover sensor detected that the front
cover was open.
A100 2-53
The ADF cover sensor detected that the ADF
cover was open.
A400 2-55
DIMM Error
Detected that DIMM was faulty or was
mounted incorrectly.
--- 2-97
Document Jam
The first side document scanning position
sensor detected that the document length was
90 cm or more while scanning the document.
A200 2-54
The first side document scanning position
sensor has not detected the top of the
document even after the document has been
fed for the specified distance.
A300 2-54
Drum Error
Detected discharge that may be attributable to
dirty corona wire on the drum unit.
--- 2-43
Drum Stop
Detected discharge when the number of
rotations of the drum has exceeded twice the
life limit.
8300 2-44
Duplex Disabled
The back cover sensor detected that the cover
was open in duplex printing mode.
0F00 2-32
Fuser Error
An error occurred in the fuser unit when the
power switch was turned ON or sleep mode
was released.
5800
6A00
6B00
6C00
6D00
6E00
6F00
7600
7800
DD00
DE00
E200
2-38
2-40
2-40
2-40
2-40
2-40
2-40
2-42
2-42
2-63
2-63
2-65
Ignore Data
Detected undecodable data during printing.
Received undecodable PS data.
---
Jam Duplex
The registration front sensor does not detect
paper pass within the specified time after the
first side was printed in duplex printing mode.
5700 2-37
Jam Inside
The eject sensor does not detect paper pass
after the registration rear sensor detected the
end of paper pass.
8800 2-45