manualshive.com logo in svg

Brother MFC-8510DN, Service Manual, Page: 360 / 373

Share
Download
Brother MFC-8510DN Service Manual Download Page 360

7-10

Confidential

(8) Disconnect the second side CIS flat cable (duplex scanning models only), first side CIS 

flat cable, ADF cover/document detection sensor harness, second side document 
scanning position sensor harness, ADF motor harness, document scanner motor 
harness, panel PCB harness, wireless LAN harness (models with wireless LAN only), 
USB host harness, speaker harness (models with speaker only), and NCU harness 
(models with NCU only) from the main PCB ASSY, and release these harnesses from 
the securing fixtures.

Fig. 7-14

Note:

• The second side CIS flat cable and the second side document scanning position 

sensor harness are provided for duplex scanning models only.

First side CIS flat cable

Second side CIS flat cable

ADF cover/document detection sensor harness

Second side document scanning position sensor harness

ADF motor harness

Document scanner motor harness

Speaker harness

NCU harness

Panel PCB harness

USB host harness

Wireless LAN harness

Summary of Contents for MFC-8510DN






















































































































































































































































































































































































Reviews:

No comments