Brother MFC-8510DN Service Manual Download Page 199

Page: 199 / 373

3-53

Confidential

9.10 Panel cover / Printed panel cover

<Touch panel models> (Refer to page

3-56

for

<Non touch panel models>

)

(1) Release the four hooks, and remove the printed panel cover from the control panel

ASSY.

(2) Remove the two taptite bind B M4x12 screws.

Fig. 3-66

(3) Remove the taptite bind B M4x12 screw to remove the touch panel PCB harness from

the machine.

(4) Slightly lift the right side of the control panel ASSY, and slide it in the direction of the

arrow to remove it from the machine.

(5) Remove the panel PCB harness from the panel PCB ASSY.

Fig. 3-67

Hooks

Taptite bind B M4x12

Control panel ASSY

Printed panel cover

Control panel ASSY

Machine

Panel PCB
ASSY

Machine

Panel PCB harness

Touch panel
PCB harness

Taptite bind B M4x12

Summary of Contents for MFC-8510DN






















































































































































































































































































































































































Search results

Summary of Contents for MFC-8510DN

Reviews:

Brother MFC-8510DN, Service Manual, Page: 199 / 373

Search results

Summary of Contents for MFC-8510DN

Reviews: