manualshive.com logo in svg

Brother MFC-8510DN, Service Manual, Page: 224 / 373

Share
Download
Brother MFC-8510DN Service Manual Download Page 224

3-78

Confidential

(4) Remove the taptite flat B M3x10 screw from the inlet.

(5) Remove the screw pan M4x8, washer spring 2-4, washer 5, and remove the earth 

harness from the machine.

(6) Remove the inlet and the power switch from the machine.

Fig. 3-106

Note:

• When removing the power switch, use a flathead screwdriver or similar tool to lift 

the edge of the power switch to remove it.

Assembling Note:

• When attaching the power switch, align the marking on the power switch with the 

engraved marking on the machine. 

• Attach the inlet as shown in the illustration above. 

• Insert the inlet harness into the housing of the machine.

Engraved 
marking

Housing

Taptite flat B M3x10

Power switch

Earth harness

Inlet

Power switch

Marking

1

2

Screw pan M4x8

Washer 5

Washer spring 2-4

Summary of Contents for MFC-8510DN






















































































































































































































































































































































































Reviews:

No comments