Epson FX-880+, Read This First

Page: 1 / 2

1
Read This First
If You Want to Use Your
EPSON FX-880+ in Okidata Mode
If you have the EPSON
®
FX-880+, you can make it work like the
Okidata
®
Microline
®
320 Turbo by turning the printer on in a
different mode. In Okidata mode, the printer emulates Okidata
functions, and the following additional settings can be selected in
default setting mode:
The default settings (shown in bold) are consistent with Okidata
Microline 320 Turbo factory settings.
Note: Because the ML 320T does not have a built-in USB interface,
the FX-880+ does not support the USB interface in Okidata mode.
If you want to use your printer in Okidata mode, do not install the
Windows
®
driver that came with your FX-880+. If you have been
using an Okidata driver, you can continue to use it with your FX-880+
in Okidata mode.
If you have been using an Okidata printer, you may want to print out
its default settings for reference before changing modes on the
FX-880+. To do this on the ML 320T, press
SHIFT + SEL to enter
Menu mode, and then press PRINT .
Feature Printer settings in Okidata mode
Software emulation IBM
®
PPDS , EPSON ESC/P
®
, OKI ML 320T
Auto tear off wait time 0.5 second , 1 second, 2 seconds, Others
Bottom margin 4.2 mm, 20 mm, 22 mm, 24 mm , Others
Line spacing (lines per inch) 6 LPI , 8 LPI
Paper out override Off (No), On (Yes)