Brother HL-1870N Service Manual Download Page 51

Page: 51 / 303

CHAPTER 2 INSTALLATION AND BASIC OPERATION

2-22

5.2

Panel Switches Functions

You can control the basic printer operations and change various printer settings with 7 control

panel switches (

Job Cancel

Reprint

Set

Back

Key

Function

Exit from the control panel menu.
Reprint settings and Error messages.
Pause / Continue printing.

Job Cancel

Stop and cancel the printer operation in progress.

Reprint

Select the reprint menu. (1-999)

+
-

Move forward and backward through menus.
Move forward and backward through selectable options.

Set

Select the control panel menu.
Set the selected menus and settings.

Back

Go back one level in the menu structure.

5.2.1

Go switch

The panel indications can be changed from the current status (MENU, ERROR and REPRINT

settings) by pressing the

switch once. For ERROR indications, the panel changes only

when the error is cleared.
You can PAUSE printing with the

switch. Pressing the

switch again restarts the print

job and clears the PAUSE. During PAUSE, the printer is in the off-line state.

NOTE:
If you do not wish to print the remaining data when the printer is in PAUSE, you can cancel the

job by pressing

Job Cancel

switch. Press the

switch to clear the PAUSE and return the

printer to the Ready state.

5.2.2

Job Cancel switch

You can cancel the processing or printing of data with the

Job Cancel

switch. When the

printer is still receiving data or the printer is in an error state, the display shows

DATA!!!

and you cannot cancel the job.

The display shows

JOB CANCELLIG

until canceling is completed. After canceling the job,

the printer returns to the

READY

state.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands