Brother HL-1870N Service Manual Download Page 178

Page: 178 / 303

HL-1850/1870N SERVICE MANUAL

5-3

NOTE:
There are many factors that determine the actual toner life, such as temperature, humidity,

type of paper that you use, the number of pages per print job, etc.

(1) Press the cover release button and then

open the front cover.

(2) Pull out the drum unit assembly.

(Fig.5-4)

Fig. 5-4

CAUTION:

It is recommended to place the drum unit assembly on a piece of disposable paper or cloth in

case you accidentally spill or scatter toner.

(3) Press the lock lever down, and then pull

the toner cartridge out of the drum unit

assembly.

(4) Unpack the new toner cartridge.

Keeping the cartridge horizontal, gently

rock it from side to side five or six times.

(Fig.5-5)

Fig. 5-5

(5) Remove the protective cover. (Fig.5-6)

Fig. 5-6

(6) Install the new toner cartridge into the

drum unit until you hear it lock into

place. when the toner cartridge is

installed correctly, the lock lever is lifted

automatically. (Fig.5-7)

Fig. 5-7

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands