Brother HL-1870N Service Manual Download Page 211

Page: 211 / 303

HL-1850/1870N SERVICE MANUAL

6-25

F-4

Curl or Wave

User Check

(1) Check the paper used meets the recommended paper specifications. Both high temperature and

humidity will cause paper to curl.

(2) If the printer is used infrequently, the paper may have sat for too long in the paper cassette. Turn

over the stack of paper in the paper cassette. Also, try rotating the paper 180° in the paper

cassette.

(3) Try printing using the straight-through output path.

NOTE:
For no paper supplied as the cause of a malfunction, see

M-4 No paper supplied in 5.

MALFUNCTIONS

in this Chapter.

F-5

Prints only single side of the paper when duplex printing

User Check

Check the size of the paper used meets the recommended paper specifications (A4 or Letter).

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands