Brother HL-1870N Service Manual Download Page 39

Page: 39 / 303

CHAPTER 2 INSTALLATION AND BASIC OPERATION

2-10

5. For Brother Peer-to-Peer network printer users (NetBIOS)

Configuring the NetBIOS port

(1) Select NetBIOS, and click the

button.

(2) Enter a unique port name (ex.

BNT1

), and then click the OK button.

(3) Enter the path name (or click the Browse button to see a list of printers), and then click the

button.

(4) Click the Finish button and restart your PC. After the PC has restarted, setup is complete.

3.3

For Macintosh Users

For USB interface cable users

Connect the printer to the Macintosh and install the BR-Script PPD File

(1) Click Connect the interface cable & Install the driver/utility.
(2) Make sure the printer power switch is

(3) Connect the USB interface cable to the Macintosh

, and then connect it to the printer.

(4) Follow the instructions on the screen.
(5) Open the Macintosh HD icon.
(6)

For Mac

OS 8.6 to 9.04 Users;

Open the Apple Extras folder.

Open the Apple LaserWriter Software folder.

For Mac

OS 9.1 to 9.2 Users;

Open the Applications.( Mac

OS 9) folder.

Open the Utilities folder.
(7)  Open the Desktop Printer Utility icon.
(8)  Select Printer (USB), and then click the OK button.
(9)  Click the Changebutton in PostScript Printer Description (PPD) file. Select Brother HL-

1850/1870N series, and then click the Select button.

(10) Click the Changebutton in USB Printer Selection. Select HL-1850/1870N series, and

then click the OK button.

(11) Click the Createbutton.
(12) Enter your printer name (HL-1850/1870N series), and then click the Save button.
(13) Select

Quit

from the File menu.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands