Brother HL-1870N Service Manual Download Page 176

Page: 176 / 303

HL-1850/1870N SERVICE MANUAL

5-1

CHAPTER 5 PERIODIC MAINTENANCE

To avoid creating secondary problems by mishandling, follow the warnings below during

maintenance work.

WARNING

(1) Always turn off the power switch and unplug the power cord from the power outlet

before accessing any parts inside the printer.

(2) Some parts inside the printer are extremely hot immediately after the printer is used.

When opening the front cover or rear cover to access any parts inside the printer,

never touch the red colored parts shown in the following figures.

1. CONSUMABLE PARTS

The consumable parts described in this section are parts which are subject to deterioration or

damage and should be replaced at least once during the period of warranty of the product if

any print quality problem appears.

1.1

Drum Unit

The CHANGE DRUM SOON message appears on the LCD display when the drum unit is

nearly at the end of its life.
Life expectancy:

20,000 pages
(When printing A4 or Letter size paper at 5% print coverage)

NOTE:
There are many factors that determine the actual drum life, such as temperature, humidity,

type of paper and toner that you use, etc.

(1) Press the cover release button; and

then open the front cover.

(2) Pull out the drum unit assembly.

(Fig.5-1)

Fig. 5-1

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands