Brother HL-1870N Service Manual Download Page 257

Page: 257 / 303

CHAPTER 7 HIDDEN FUNCTIONS

7-2

2. PROFESSIONAL MENU MODE

The Professional Menu mode enables to customize various functions for specific users and

may be opened to users if necessary.

2.1

Enabling and Disabling Professional Menu Mode

Entering the Professional Menu Mode

Turn the machine on. Press the

switch and

Set

switch together to enter the Professional

Menu mode.

Accessing the Required Menu

Use the either

switch to scroll through the menu listing. To select an item, press the

Set

switch. Then the sub-menu will appear.

Scroll through the sub menu items using the

switches. To go back to a higher level,

select the exit menu in the same level using the

switches.

Inputting a Value or Setting for a Professional Menu Mode

Enter the required mode as explained above. The setting appearing on the display is the

current setting.

Select the required setting using the

switches, then press the

Set

switch. The previous

value remains if the

Set

switch is not pressed.

Exiting the Professional Menu Mode

There are three options to exit the Professional Menu mode; either to press

switch at any

sub menus, to press the

switch consecutively to go up roots till exiting the Professional

Menu mode, or to go down the menu using

switches till the menu exit MENU appears,

and then press the

Set

switch to exit the mode.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands