Brother HL-1870N Service Manual Download Page 236

Page: 236 / 303

CHAPTER 6 TROUBLESHOOTING

6-50

I-18

Gray background

Possible cause

Step

Check

Result

Remedy

Print paper

Does the paper being used

meet the paper specification

(weight, etc.).

Recommend to use the specified

types of paper.

Yes

Recommend to change to

freshly unpacked paper.

Toner sensing

failure

(printer side)

Does the Ready message

appear on the LCD display

even after removing the drum

unit and toner cartridge?

Yes

Toner sensor failure. Clean the

toner sensor and check the

toner sensor connection.

Toner cartridge

failure

Is the problem solved after

replacing the toner cartridge?

Yes

Replace the toner cartridge.

Drum unit failure

Is the problem solved after

replacing the drum unit?

Yes

Replace the drum unit.

Replace the high-voltage power

supply PCB.

NOTE:
The following cases increase the possibility of this problem.

•

Acid paper is being used.

•

The drum unit is at the end of its life.

•

There is dust or paper powder.

I-19

Hollow print

Possible cause

Step

Check

Result

Remedy

Print paper

Is thick paper of more than

43lb being used or extremely

rough surface paper?

Yes

Recommend to use the specified

types of paper.

User Check

(1) Check the paper used meets the recommended paper specifications.
(2) Select the Thick paper mode in the printer driver, or use thinner paper than you

are currently using.

(3) Check the printers environment, conditions such as high humidity may cause this

situation to occur.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands