Brother HL-1870N Service Manual Download Page 49

Page: 49 / 303

CHAPTER 2 INSTALLATION AND BASIC OPERATION

2-20

(3) Open the

Property

tab in the printer driver. Select the duplex printing mode in the

Paper

tab, and then click the

button. The printer will print on both sides of the paper

automatically.

4.5

Manual Feed

If paper is placed in the multi-purpose tray when the setting MANUAL FEED = ON has been

set in PAPER mode using the control panel, the printer will load paper only form the multi-

purpose tray.

NOTE:
Note the following when feeding paper manually:

•

If the application software supports a manual feed selection in the print menu, it can be

selected in that software. The software command setting overrides the control panels

setting. It will not be necessary to set MANUAL FEED in PAPER mode.

•

If pre-printed paper is used in the multi-purpose tray, the paper should be inserted top

edge first with the pre-printed side face up.

4.6 Printing side of duplex printing

Since the standard delivery tray is a face down tray, when duplex printing is carried out, an

even-numbered paper is printed first, then the odd numbered page, so that the page order in

the output tray is correct.
If single side printing is done in normal mode, paper is drawn from an input tray, and it naturally

prints and discharges a face down page.
If single side printing of 1-page of data is done in duplex mode, printing is done by feeding

paper from an input tray, passing it through the duplex unit and then printing the first side.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands