Brother HL-1870N Service Manual Download Page 58

Page: 58 / 303

HL-1850/1870N SERVICE MANUAL

2-29

5.4

How to Use the Control Panel

The followings are the basic steps when operating the switches;

Set

, and

Back

•

If no control panel operations are performed for 30 seconds, the LCD automatically

returns to READY.

•

When pressing the

Set

switch to select a setting, an asterisk briefly appears at the end of

display. After that, the display returns to the previous menu level.

•

After changing the status or number, pressing the

Back

switch before pressing the

Set

switch will cause the display to return to the previous menu with the original setting

unchanged.

•

Numbers can be input by scrolling through the available range (000 to 999) or by setting

digits one at a time. When setting digits one at a time, the blinking digit is the changeable

digit.

•

An example for operation: When turning the MP FIRST setting on

Choose this setting to load paper from the multi-purpose tray first.

READY

INFORMATION

PAPER

SOURCE

MP FIRST

=OFF

=ON

Press the

switch.

Press the

switch to scroll forward or backward

through the Menu selections.

Press the

Set

switch.

Press the Set switch to enter the next level of the selected menu.

Press the

Set

switch to proceed to the next menu level.

Press the

switch.

Press the

Set

switch.

Press the

switch.

Press the

Set

switch.

An asterisk

briefly appears at the end of the display.

The default setting is indicated by an

”.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands