Brother HL-1870N Service Manual Download Page 214

Page: 214 / 303

CHAPTER 6 TROUBLESHOOTING

6-28

S-4

This printer does not appear in Chooser with iMac and Power Macintosh G3/G4

with USB.

User Check

(1)  Check the printer is turned on.
(2)  Check the USB interface cable is connected correctly.
(3)  Check the printer driver is installed correctly.

Possible cause

Step

Check

Result

Remedy

Printer

connection

Select Apple System Profiler

in Apple Menu. Are the

following items indicated in the

USB box of the Device and

Volumes tab?

•

Product ID: 11 ($6)

•

Vender: Brother International

Corporation (or 0x4f9)

Check the printer is turned on

and the USB interface cable

is connected correctly.
Check that the USB cable

used is the shielded twisted

pair type and 5 m or less.
Try to connect the printer and

PC with the USB cable

directly.

Driver

installation

Are there the following files in

the Extensions Folder of

System Folder?

Try to re-install the printer

driver.

•

BR_Backgrounder

•

BR_PrintMoniter(USB)

•

HL-1850/1870N

•

USBPrintDriver

•

BR_Backgrounder

•

BR_PrintMoniter(USB)

•

HL-1850/1870N

•

USBPrintDriver(BRB)

Yes

Turn off the printer and PC

power switch, and check all

connections between them.

Then, turn them on again.

*NOTE:

The value or alphabet following BR is a product ID.

Summary of Contents for HL-1870N
















































































































































































































































































































Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands

Brother HL-1870N, Service Manual

Search results

Summary of Contents for HL-1870N

Reviews:

Related manuals for HL-1870N

Brands by name

Popular brands