Brother HE-800B, Service Manual

Page: 21 / 178

HE-800B
3. FUNCTION SETTINGS
12
Error processing settings (600 to 699)
No. Setting items Setting range Default value
650
Time from error occurring to buzzer stopping.
OFF: Buzzer does not stop.
2 to 30: Buzzer stops after the specified time (set in units of 2 seconds).
OFF, 2 to 30 OFF
651
Needle zigzag and feed motor energization status when a non-resettable error
occurs.
OFF: Needle zigzag and feed motor energization is turned off.
ON: Needle zigzag and feed motor energization remains on.
ON/OFF OFF
652
Needle zigzag motor status when a pause or thread breakage occurs during
automatic sewing.
OFF: Needle zigzag motor energization is turned off.
ON: Needle zigzag motor energization remains on.
ON/OFF ON
Maintenance settings (700 to 799)
No. Setting items Setting range Default value
700
Y cutting position (feed direction) correction.
The cutter position for the sewing pattern can be
corrected in the Y (feed) direction.
Settings can be made in units of 0.025 mm.
When + is selected, the cutting position moves
further to the back.
-0.800 to
0.800
0
750
Continuous sewing permission (for administrator).
OFF: Disabled (Continuous sewing forbidden).
ON: Sewing operation is repeated while the treadle is being depressed to
2nd step.
NOTE:
This setting is test operation mode for use by an administrator.
It is dangerous to set it to ON while sewing, so be sure to set it back to
OFF after use.
ON/OFF OFF
751
Continuous sewing interval (for administrator).
* Displayed when No. 750 above is set to “ON”.
Setting can be carried out in units of 100 ms.
0 to 2500 1000
752 Sewing machine ID code (for specifying SD card folder) 0 to 99 0
755
Thread winding speed limit.
OFF: Upper limit is not limited to 2000 sti/min.
* Thread winding is carried out at the speed specified at the operation panel.
ON: Upper limit is limited to 2000 sti/min.
* If the speed specified at the operation panel exceeds 2000 sti/min, thread
winding will be limited to 2000 sti/min.
ON/OFF ON
Forward
1445Q
Back