Brother HE-800B, Service Manual

Page: 19 / 178

HE-800B
3. FUNCTION SETTINGS
10
Feed mechanism (200 to 299)
No. Setting items Setting range Default value
250
Automatic upper shaft deceleration to emphasize feeding.
OFF: Normal.
ON: The proportional feed time for each stitch is reduced from normal in
order to prevent needle deflection with heavy materials.
* This may limit the upper shaft speed.
ON/OFF OFF
251
Feed timing correction.
Setting can be carried out in units of 1°.
-: Feed timing is advanced in relation to the upper shaft phase.
+: Feed timing is retarded in relation to the upper shaft phase.
-20 to 20 0
252
*1
Home position detection method after power is turned on.
1: Home position detection is carried out by pedal operation.
2: Home position detection is carried out by pressing the RESET key.
1 to 2 1
*1 This is not initialized during initialization mode. Also not overwritten from SD card.
Operation panel settings (300 to 399)
No. Setting items Setting range Default value
300
Parameter number assignment for FUNC key.
Functions can be assigned to the FUNC key to make it operate as a seventh
shortcut key.
OFF: No assignment.
(The help screen is displayed while the FUNC key is pressed.)
1 to 60: When the FUNC key is pressed, the parameter setting screen for the
number which has been set is displayed.
OFF, 1 to 60 OFF
301
Display screen contrast.
You can change the degree of contrast.
The higher the number, the stronger the contrast.
1 to 15 10
302
Counter display during automatic sewing mode.
The contents appearing at (1) in the display during automatic sewing mode
can be set to either the lower thread counter display or the production counter
display.
1: Lower thread counter
2: Production counter
1 to 2 1
350
Production counter operation by cycle sewing units during cycle sewing.
OFF: Counts in units of individual programs (1 hole).
ON: Counts in units of individual cycle programs.
ON/OFF OFF
4926M