Brother HE-800B, Service Manual

Page: 33 / 178

HE-800B
3. FUNCTION SETTINGS
24
Method B
Have an SD card ready.
* The SD card is only used at the step of selecting protect setting mode, so any type of SD card can be used as long as it
can be accessed. In addition, if making the setting two or more times, a different SD card from the one used before can be
used.
1. Insert the SD card, and then while pressing the RESET key (1) and the TEST key (2) and the ENTER key (3), turn on the
power switch.
* The previous starting method (“A, B” or “B”) will appear in the menu display.
* The method is set to “A,B” at the time of shipment from the factory.
2. Press the or key (4) to select the next starting method.
Starting method Details
A,B Protect setting mode can be started using either Method A or Method B.
B Protect setting mode can only be started using Method B.
3. Press the ENTER key (3) to store the starting method.
4. For the method of operation from this point onward, refer to steps 2 to 9 in “
Method A ” (previous page).
0803D